Bimetallic
bearings are one of the non-lubricated bearings, the product is a
high-quality low-carbon steel bimetal back as the base, the surface of
sintered lead-bronze alloy, after several high temperature sintering and
compact rolling copper, steel one Bimetallic strip rolled. It
has a high load capacity, impact resistance, high temperature,
self-lubricating ability and other characteristics, especially for heavy
load, low speed, reciprocating or swinging difficult to lubricate and
the formation of oil film occasions, are not afraid of water erosion and
other acid erosion And wash.
Because
the substrate is stable to low carbon steel, the outer diameter of the
roll-to-roll bushing pair is safeguarded from the outside diameter and
does not require screwing after the product is seated in the seat bore.
With an interference fit, the outer circle can be prevented. Changes
in the chemical composition of the inner surface of the alloy layer to
meet the different bearing pressure, temperature and different sliding
speed requirements, the friction surface in the production of different
structures designed oil tank, oil hole to meet the requirements of
different fueling methods and to prevent bite axis phenomenon.
Bimetal
bearings with good wear resistance and other advantages, especially
suitable for medium-speed and medium-speed high-load and other
occasions. Through
special technological means, a variety of oil grooves, oil holes and
oil holes can be processed on the friction surface to adapt to different
lubrication conditions. Products
are mainly used in heavy truck balance bridge bushings, gaskets;
automotive engine, chassis, motorcycle clutch, gear pump wipe board and
lifting equipment and other fields.
CATEGORIES
Latest news
- Ferrofluid Vacuum Feedthrough Seals us
- SF-1 Carbon Steel Self-lubricating Bea
- Ball transfer unit
- Motorcycle suspension bushing
- Bimetal Flange Bush Bearing
- Selection standard for dimension refer
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan
- TEL: 86-731-84770165
- FAX: 86-731-84770163
- E-mail: sales2@slide-bearing.com
> Industry news