Full complement bearing
Without cage bearings, the total circumferential clearance between each row of rolling elements is less than the diameter of the rolling elements, and the total clearance is small enough to provide satisfactory bearing performance.
Angular contact bearing
Rolling bearings with a nominal contact angle greater than 0 degrees but less than 90 degrees.
Rolling bearing
A bearing that performs rolling (not sliding) motion between parts that are subjected to load and relative motion with each other, and includes a raceway member and a rolling body set with or without isolation or guide.
Single row bearing
A rolling bearing with a row of rolling elements.
Double row bearing
A rolling bearing with two rows of rolling elements.
Multi-row bearing
A rolling bearing having more than two rows of rolling elements that are subjected to loads in the same direction.
Rigid bearing
A bearing that can resist the misalignment between the axes of the raceways.
Self-aligning bearing
A raceway is a spherical surface that can adjust the angular deviation and angular movement of the bearing between the axes of the raceway.
External-aligning bearing
Use a spherical surface on the ferrule or washer to match the corresponding surface in the aligning race, the aligning washer or the seat bore to adjust the angular bearing of the angular misalignment between the axes of the axial bearing housing.
Separable bearing
A rolling bearing with separable sub-parts.
Open bearing
Rolling bearings without dust caps and seals.
Sealed bearing
Rolling bearings with sealing rings on one or both sides.
Dustproof bearing
Rolling bearings with dust caps on one or both sides.
Capped bearing
Rolling bearing with one or two sealing rings, one or two dust caps or a sealing ring and a dust cap.
Prelubricated bearing
The manufacturer has filled the rolling bearing of the lubricant.
Riddle bearing
It is mainly used for rolling bearings with radial load and nominal contact between 0 and 45 degrees.
Radial contact beaering
Airfame bearing
In terms of structural design and function, it is used in the general structure of aircraft, including rolling bearings for control systems.
Non-sparable bearing
After the final assembly, the bearing rings are not free to separate the rolling bearings.
Split bearing
Both the ferrule and the cage can be divided into two semi-circular rolling bearings for ease of installation.
Metric bearing
Rolling bearings in the original design when the dimensions and tolerances are basically expressed in metric units.
Metric series bearing
Rolling bearings in accordance with the ISO metric series size scheme.
Inch bearing
Rolling bearings in the original design with dimensions and tolerances in inches.
Inch series bearing
Rolling bearings in accordance with the ISO inch series size scheme.
Instrument precision bearing
CATEGORIES
Latest news
- Ferrofluid Vacuum Feedthrough Seals us
- SF-1 Carbon Steel Self-lubricating Bea
- Ball transfer unit
- Motorcycle suspension bushing
- Bimetal Flange Bush Bearing
- Selection standard for dimension refer
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan
- TEL: 86-731-84770165
- FAX: 86-731-84770163
- E-mail: sales2@slide-bearing.com
> Industry news